HP EliteBook 850 G5 Notebook PC Скачать руководство пользователя | Manualshive

Страница: 104 / 122

background image

IMPORTANT:

Recovery through HP Recovery Manager should be used as a final attempt to correct

computer issues.

●

HP Recovery media must be used if the computer hard drive fails. If you have not already created
recovery media, see

Using HP Recovery media (select products only) on page 91

.

●

To use the Factory Reset option (select products only), you must use HP Recovery media. If you have not
already created recovery media, see

Using HP Recovery media (select products only) on page 91

●

If your computer does not allow the creation of HP Recovery media or if the HP Recovery media does not
work, you can obtain recovery media for your system from support. You can find contact information
from the HP website. Go to

http://www.hp.com/support

, select your country or region, and follow the

on-screen instructions.

IMPORTANT:

HP Recovery Manager does not automatically provide backups of your personal data. Before

beginning recovery, back up any personal data you want to retain.

Using HP Recovery media, you can choose from one of the following recovery options:

NOTE:

Only the options available for your computer display when you start the recovery process.

●

System Recovery—Reinstalls the original operating system, and then configures the settings for the
programs that were installed at the factory.

●

Factory Reset—Restores the computer to its original factory state by deleting all information from the
hard drive and re-creating the partitions. Then it reinstalls the operating system and the software that
was installed at the factory.

The HP Recovery partition (select products only) allows System Recovery only.

Using the HP Recovery partition (select products only)

The HP Recovery partition allows you to perform a system recovery without the need for recovery discs or a
recovery USB flash drive. This type of recovery can be used only if the hard drive is still working.

To start HP Recovery Manager from the HP Recovery partition:

IMPORTANT:

For a tablet with a detachable keyboard, connect the tablet to the keyboard base before

beginning these steps (select products only).

1.

Type

recovery

in the taskbar search box, select HP Recovery Manager, and then select Windows

Recovery Environment.

‒

or –

For computers or tablets with keyboards attached, press

f11

while the computer boots, or press and

hold

f11

as you press the power button.

For tablets without keyboards:

●

Turn on or restart the tablet, and then quickly hold down the volume up button; then select f11.

‒

or –

●

Turn on or restart the tablet, and then quickly hold down the volume down button; then select f11.

2.

Select Troubleshoot from the boot options menu.

3.

Select Recovery Manager, and then follow the on-screen instructions.

94

Chapter 10 Backing up, restoring, and recovering

«
...
102
103
104
105
106
...
»

Содержание EliteBook 850 G5 Notebook PC



























































































































Отзывы:

Нет отзывов

Похожие инструкции для EliteBook 850 G5 Notebook PC

Бренд: Panasonic Страницы: 40

Бренд: Gateway Страницы: 87

Бренд: jp.ik Страницы: 2

Toughbook CF-48P4FAUEM

Бренд: Panasonic Страницы: 36

Toughbook CF-28PMJAZQM

Бренд: Panasonic Страницы: 36

Toughbook CF-73XCVTSBM

Бренд: Panasonic Страницы: 44

Toughbook CF-74JCJBDxM

Бренд: Panasonic Страницы: 69

Toughbook CF-52EKMxDxM

Бренд: Panasonic Страницы: 88

Inspiron Chromebook 7486

Бренд: Dell Страницы: 27

Бренд: Epson Страницы: 11

Бренд: Toshiba Страницы: 11

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

Бренд: Sony Страницы: 2

VGNCS390JAB - VAIO CS Series

Бренд: Sony Страницы: 2

VGN-Z750D - VAIO - Core 2 Duo 2.66 GHz

Бренд: Sony Страницы: 2

VGN-X505ZP VAIO

Бренд: Sony Страницы: 1

Бренд: Sony Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды