EL-MF877-00 Page 4
Template Revision B
PSG instructions for this template are available at
EL-MF877-01
a) Remove the cables connect to the HDD.
b) Loose the screws that secure the HDD cage to chassis
c) Push the handle and push the HDD cage off the chassis
d) Loose the screws on thetwo side of the HDD cage
e) Pull the HDD from the HDD cage
3.2 Remove the ODD.(see Figure 31-34 below)
a) Remove the cables connect to the ODD.
b) Pull outward on all three tabs on the front bezel.
c) Loose the screws on the ODD cage
d) Lift the handle and pull the ODD out of the ODD cage.
3.3 Remove the front I/O.(see Figure 35-37 below)
a) Loose the screw that secure the front I/O to chassis.
b) Cut the plastic cable clamp that secures the cables to the cover
c) Lift the Front I/O and pull it out of the chassis.
3.4 Remove the power on/off switch.(see Figure 38&39 below)
a) Extrusion the bottom of the switch.
b) Pull the switch out of the chassis.
4. POWER SUPPLY
4.1 Take off the power supply: (see Figure 40-43 below)
a) Remove the four screws that secure the power supply to the chassis.
b) Press the baffle and slide the power supply toward the front of the computer,
c) Lift the power supply out of the chassis.
4.2 Remove the cover from the power supply: (see Figures 44-48 below)
a) Remove the six screws that secure the cover to the power supply chassis.
b) Cut the plastic cable clamp that secures the cables to the cover.
