HP Elite 7000 Microtower Скачать руководство пользователя

Страница: 29 / 49

Solving Keyboard and Mouse Problems

If you encounter keyboard or mouse problems, see the documentation that came with the equipment
and the common causes and solutions listed in the following table.

Table 2-8

Solving Keyboard Problems

Keyboard commands and typing are not recognized by the computer.

Cause

Solution

Keyboard connector is not properly connected.

On the Windows XP Desktop, click

Start

Shut Down

On the Windows Vista Desktop, click

Start

, click the

arrow on the lower right corner of the Start menu, then
select

Shut Down

After the shutdown is complete, reconnect the keyboard
to the back of the computer and restart the computer.

Program in use has stopped responding to commands.

Shut down your computer using the mouse and then restart
the computer.

Keyboard needs repairs.

See the Worldwide Limited Warranty for terms and conditions.

Computer is in

standby

mode.

Press the power button to resume from

standby

mode.

CAUTION:

When attempting to resume from

standby

mode,

do not hold down the power button for more than four seconds.
Otherwise, the computer will shut down and you will lose any
unsaved data.

Cursor will not move using the arrow keys on the keypad.

Cause

Solution

The

Num Lock

key may be on.

Press the

Num Lock

key. The Num Lock light should not be on

if you want to use the

arrow

keys. The

Num Lock

key can be

disabled (or enabled) in Computer Setup.

Table 2-9

Solving Mouse Problems

Mouse does not respond to movement or is too slow.

Cause

Solution

Mouse connector is not properly plugged into the back of the
computer.

Shut down the computer using the keyboard.

Press the

Ctrl

and

Esc

keys at the same time (or press

the

Windows logo

key) to display the

Start

menu.

Use the

arrow

keys to select

Shut Down

and then press

the

Enter

key.

After the shutdown is complete, plug the mouse
connector into the back of the computer (or the keyboard)
and restart.

Program in use has stopped responding to commands.

Shut down the computer using the keyboard then restart the
computer.

Mouse may need cleaning.

Remove the roller ball cover on the mouse and clean the
internal components.

Mouse may need repair.

See the Worldwide Limited Warranty for terms and conditions.

Computer is in

standby

mode.

Press the power button to resume from

standby

mode.

ENWW

Solving Keyboard and Mouse Problems

Содержание Elite 7000 Microtower


















































Результаты поиска

Содержание Elite 7000 Microtower

Отзывы:

Похожие инструкции для Elite 7000 Microtower

Бренды по названию

Популярные бренды

HP Elite 7000 Microtower, Руководство по устранению неисправностей

Результаты поиска

Содержание Elite 7000 Microtower

Отзывы:

Похожие инструкции для Elite 7000 Microtower

Бренды по названию

Популярные бренды