HP E4510-48G, Справочник по командам

Страница: 99 / 1334

2-8
Field Description
Select Ports The number of selected ports
Unselect Ports The number of unselected ports
Share Type Load sharing type
display link-aggregation verbose
Syntax
display link-aggregation verbose [ bridge-aggregation [ interface-number ] ]
View
Any view
Default Level
1: Monitor level
Parameters
bridge-aggregation : Displays detailed information about the Layer-2 aggregate groups corresponding
to Layer-2 aggregate interfaces.
interface-number : Aggregate interface number. Note that the aggregate interface you specify must
already exist.
Description
Use the display link-aggregation verbose command to display detailed information about the
aggregation groups corresponding to the aggregate interfaces.
To display the information of a specific Layer-2 aggregate group, use the display link-aggregation
verbose bridge-aggregation interface-number command.
To display the information of all Layer-2 aggregate groups, use the display link-aggregation verbose
bridge-aggregation command.
To display the information of all aggregate groups, use the display link-aggregation verbose
command.
Examples
# Display the detailed information of the aggregation group corresponding to Layer-2 aggregate
interface Bridge-aggregation 10 .
<Sysname> display link-aggregation verbose bridge-aggregation 10
Loadsharing Type: Shar -- Loadsharing, NonS -- Non-Loadsharing
Port Status: S -- Selected, U -- Unselected
Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation,
D -- Synchronization, E -- Collecting, F -- Distributing,
G -- Defaulted, H -- Expired
Aggregation Interface: Bridge-Aggregation10