HP E4510-48G, Справочник по командам

Страница: 848 / 1334

14-29
Table 14-11 ICMPv6-specific parameters for advanced IPv6 ACL rules
Parameters Function Description
icmpv6-type
{ icmpv6-type
icmpv6-code |
icmpv6-message }
Specifies the ICMPv6
message type and code.
The icmpv6-type argument ranges from 0
to 255.
The icmpv6-code argument ranges from 0
to 255.
The icmpv6-message argument specifies
a message name. Supported ICMP
message names and their corresponding
type and code values are listed in
Table
14-12 .
Table 14-12 ICMPv6 message names supported in advanced IPv6 ACL rules
ICMPv6 message name Type Code
redirect 137 0
echo-request 128 0
echo-reply 129 0
err-Header-field 4 0
frag-time-exceeded 3 1
hop-limit-exceeded 3 0
host-admin-prohib 1 1
host-unreachable 1 3
neighbor-advertisement 136 0
neighbor-solicitation 135 0
network-unreachable 1 0
packet-too-big 2 0
port-unreachable 1 4
router-advertisement 134 0
router-solicitation 133 0
unknown-ipv6-opt 4 2
unknown-next-hdr 4 1
Description
Use the rule command to create an advanced IPv6 ACL rule or modify an existing advanced IPv6 ACL
rule.
Use the undo rule command to remove an advanced IPv6 ACL rule or remove some criteria from the
rule.
If you specify no optional keywords, the undo rule command removes the entire ACL rule; otherwise,
the command removes only the specified criteria. Before performing the undo rule command, you
may need to use the display acl ipv6 command to view the ID of the rule.