HP E4510-48G, Справочник по командам

Страница: 839 / 1334

14-20
IPv6 ACL Configuration Commands
acl ipv6
Syntax
acl ipv6 number acl6-number [ name acl6-name ] [ match-order { auto | config } ]
undo acl ipv6 { all | name acl6-name | number acl6-number }
View
System view
Default Level
2: System level
Parameters
number acl6-number : Specifies the number of the IPv6 ACL, which must be in the following ranges:
z
2000 to 2999 for basic IPv6 ACLs
z
3000 to 3999 for advanced IPv6 ACLs
name acl6-name : Specifies the name of the ACL, which is a case insensitive string of 1 to 32
characters. It must start with an English letter and cannot be the English word of all to avoid confusion.
match-order : Specifies the order in which ACL rules are matched.
auto : Performs depth-first match.
config : Performs matching against rules in the order in which they are configured.
all : Specifies all IPv6 ACLs.
Description
Use the acl ipv6 command to enter IPv6 ACL view. If the ACL does not exist, it is created first.
Use the undo acl ipv6 command to remove a specified IPv6 ACL or all IPv6 ACLs.
By default, the match order is config .
Note that:
z
You can specify a name for an IPv6 ACL only when you create the ACL. After creating an ACL,
you cannot specify a name for it, nor can you change or remove its name.
z
The name of an IPv6 ACL must be unique among IPv6 ACLs. However, an IPv4 ACL and an IPv6
ACL can share the same name.
z
If you specify both an ACL number and an ACL name in one command to enter the view of an
existing ACL, be sure that the ACL number and ACL name identify the same ACL.
z
You can also use this command to modify the match order of an existing IPv6 ACL, but only when
the ACL does not contain any rules.
Examples
# Create IPv6 ACL 2000.
<Sysname> system-view
[Sysname] acl ipv6 number 2000
[Sysname-acl6-basic-2000]