HP E4510-48G, Справочник по командам

Страница: 781 / 1334

11-9
View
PKI domain view
Default Level
2: System level
Parameters
url-string : URL of the CRL distribution point, a case-insensitive string of 1 to 127 characters in the
format of ldap://server_location or http:// server_location, where server_location must be an IP address
and does not support domain name resolution currently.
Description
Use the crl url command to specify the URL of the CRL distribution point.
Use the undo crl url command to remove the configuration.
By default, no CRL distribution point URL is specified.
Note that when the URL of the CRL distribution point is not set, you should acquire the CA certificate
and a local certificate, and then acquire a CRL through SCEP.
Examples
# Specify the URL of the CRL distribution point.
<Sysname> system-view
[Sysname] pki domain 1
[Sysname-pki-domain-1] crl url ldap://169.254.0.30
display pki certificate
Syntax
display pki certificate { { ca | local } domain domain-name | request-status }
View
Any view
Default Level
2: System level
Parameters
ca : Displays the CA certificate.
local : Displays the local certificate.
domain-name : Name of the PKI domain, a string of 1 to 15 characters.
request-status : Displays the status of a certificate request.
Description
Use the display pki certificate command to display the contents or request status of a certificate.
Related commands: pki retrieval-certificate , pki domain and certificate request polling .