HP E4510-48G, Справочник по командам

Страница: 678 / 1334

3-4
display stop-accounting-buffer
Syntax
display stop-accounting-buffer hwtacacs-scheme hwtacacs-scheme-name [ slot slot-number ]
View
Any view
Default Level
2: System level
Parameters
hwtacacs-scheme hwtacacs-scheme-name : Specifies a HWTACACS scheme by its name, a string of
1 to 32 characters.
slot slot-number : Specifies the specified member device in an IRF. The slot-number argument
indicates the member device ID.
Description
Use the display stop-accounting-buffer command to display information about the stop-accounting
requests buffered in the device.
Related commands: reset stop-accounting-buffer , stop-accounting-buffer enable , retry
stop-accounting .
Examples
# Display information about the buffered stop-accounting requests for HWTACACS scheme hwt1 .
<Sysname> display stop-accounting-buffer hwtacacs-scheme hwt1
Total 0 record(s) Matched
hwtacacs nas-ip
Syntax
hwtacacs nas-ip ip-address
undo hwtacacs nas-ip
View
System view
Default Level
2: System level
Parameters
ip-address : IP address in dotted decimal notation. It must be an address of the device and cannot be
all 0s address, all 1s address, a class D address, a class E address or a loopback address.