HP E4510-48G, Справочник по командам

Страница: 473 / 1334

5-8
Examples
# Use IPv6 prefix list Filter 2 to filter advertised RIPng updates.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] filter-policy ipv6-prefix Filter2 export
filter-policy import (RIPng view)
Syntax
filter-policy { acl6-number | ipv6-prefix ipv6-prefix-name } import
undo filter-policy import
View
RIPng view
Default Level
2: System level
Parameters
acl6-number : Specifies the number of an ACL to filter incoming routing information, in the range of
2000 to 3999.
ipv6-prefix ipv6-prefix-name : Specifies the name of an IPv6 prefix list to filter incoming routes, in the
range 1 to 19 characters.
Description
Use the filter-policy import command to define an inbound route filtering policy. Only routes which
match the filtering policy can be received.
Use the undo filter-policy import command to disable inbound route filtering.
By default, RIPng does not filter incoming routing information.
Examples
# Reference IPv6 prefix list Filter1 to filter incoming RIPng updates.
<Sysname> system-view
[Sysname] ripng 100
[Sysname-ripng-100] filter-policy ipv6-prefix Filter1 import
import-route
Syntax
import-route protocol [ process-id ] [ cost cost | route-policy route-policy-name ] *
undo import-route protocol [ process-id ]
View
RIPng view