HP E4510-48G, Справочник по командам

Страница: 441 / 1334

3-7
Field Description
MetricOut Additional routing metric added to the outgoing routes
MetricOut route policy
Name of the routing policy used to add the additional
routing metric for the outgoing routes. If no routing policy
is referenced, the field displays
Not designated .
Split-horizon
Indicates whether split-horizon is enabled (ON: enabled,
OFF: disabled)
Poison-reverse
Indicates whether poison-reverse is enabled (ON:
enabled, OFF: disabled)
Input/Output
Indicates if the interface is allowed to receive (Input) or
send (Output) RIP messages (on means it is allowed, off
means it is not allowed)
Current packets number/Maximum
packets number Packets to be sent/Maximum packets that can be sent on
the interface
display rip route
Syntax
display rip process-id route [ ip-address { mask | mask-length } | peer ip-address | statistics ]
View
Any view
Default Level
1: Monitor level
Parameters
process-id : RIP process ID, in the range of 1 to 65535.
ip-address { mask | mask-length }: Displays route information about a specified IP address.
peer ip-address : Displays all routing information learned from a specified neighbor.
statistics : Displays the route statistics, including total number of routes and number of routes of each
neighbor.
Description
Use the display rip route command to display the routing information of a specified RIP process.
Examples
# Display all routing information of RIP process 1.
<Sysname> display rip 1 route
Route Flags: R-RIP, T-TRIP
P-Permanent, A-Aging, S-Suppressed, G-Garbage-collect
--------------------------------------------------------------------------
Peer 21.0.0.23 on Vlan-interface1
Destination/Mask NextHop Cost Tag Flags Sec
56.0.0.0/8 21.0.0.23 1 0 RA 102