8-1
8
Voice VLAN Configuration Commands
Voice VLAN Configuration Commands
display voice vlan oui
Syntax
display voice vlan oui
View
Any view
Default Level
1: Monitor level
Parameters
None
Description
Use the
display voice vlan oui
command to display the currently supported organizationally unique
identifier (OUI) addresses, the OUI address masks, and the description strings.
Related commands:
voice vlan mac-address
.
In general, as the first 24 bits of a MAC address (in binary format), an OUI address is a globally unique
identifier assigned to a vendor by IEEE. OUI addresses mentioned in this document, however, are
different from those in common sense. OUI addresses in this document are used to determine whether
a received packet is a voice packet. They are the results of the AND operation of the two arguments
mac-address
and
oui-mask
in the
voice vlan mac-address
command.
Examples
# Display the currently supported OUI addresses.
<Sysname> display voice vlan oui
Oui Address Mask Description
0001-e300-0000 ffff-ff00-0000 Siemens phone
0003-6b00-0000 ffff-ff00-0000 Cisco phone
0004-0d00-0000 ffff-ff00-0000 Avaya phone
0060-b900-0000 ffff-ff00-0000 Philips/NEC phone
Содержание E4510-48G
