HP E4510-48G, Справочник по командам

Страница: 1318 / 1334

21-6
Master HA State to Slot [2]: Waiting batch backup request from slave.
Master HA State to Slot [3]: Realtime backup to slave.
The above information indicates the following:
z
Slaves 1 is absent, which means that the device is not in use
z
The master is waiting for the batch backup request from slave 2
z
Slaves 3 is performing real time backup
Table 21-4 display switchover state command output description for the master
Field Description
Master HA State to Slot slot-id
Indicates that this output information is generated by the
master.
Describes the master/slave switchover states between the
master and the slave whose
slot-id represents its member ID.
Data smooth The master and the slave are smoothing data.
# Display the master/slave switchover state of slave 3.
<Sysname> display switchover state slot 3
Slave HA State: Receiving realtime data.
The above information indicates that slave 3 is receiving real time backup data.
Table 21-5 display switchover state command output description for a slave
Field Description
Slave HA State
Indicates that this output information is generated by a slave.
Describes the master/slave switchover state of the slave.
Waiting The slave is ready, and is waiting to enter the batch backup state.
irf auto-update enable
Syntax
irf auto-update enable
undo irf auto-update enable
View
System view
Default Level
3: Manage level
Parameters
None
Description
Use the irf auto-update enable command to enable the auto update of boot files in an IRF.
Use the undo irf auto-update enable command to disable this function.