HP E4510-48G, Справочник по командам

Страница: 1034 / 1334

4-32
system-failure
Syntax
system-failure { maintain | reboot }
undo system-failure { maintain | reboot }
View
System view
Default Level
3: Manage level
Parameters
maintain : Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot : Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Description
Use the system-failure command to configure the exception handling method on all member devices.
By default, all member devices adopt the reboot method to handle exceptions.
The exception handling method is effective to the failed member device only, and does not influence
the operations of other stack members
Examples
# Set the exception handling method to reboot .
<Sysname> system-view
[Sysname] system-failure reboot