HP E-MSM720, Руководство по установке, Страница: 27 / 55

3-1
3
E-MSM720 Initial Configuration
Perform Initial Configuration
N o t e
A factory-default E-MSM720 is assumed. Ports 1 to 4 are available at
192.168.1.1.
N o t e
Do not connect power or network cables to the E-MSM720 until directed to
do so.
To initially configure the E-MSM720:
1. Configure your computer to use a static IP address in the range
192.168.1.2
to
192.168.1.254
and set the subnet mask to
255.255.255.0 . Set the default gateway to 192.168.1.1, and DNS server
to 192.168.1.1 .
2. Connect Network Cables:
a. Disconnect any cable from your computer Ethernet ports, and disable
any wireless connection.
b. Connect E-MSM720 port 1 (ports 2 to 4 can also be used) to your
computer Ethernet port.
c. Connect E-MSM720 port T5 or T6 (or if enabled, port S5 or S6) to a
network with Internet access or to the PC port of a DSL modem or
equivalent.
3. Power on the E-MSM720 wait approximately 90 seconds until the front
LEDs stop blinking.
4. Perform Initial Login Tasks:
a. Using Microsoft Internet Explorer 7/8 or Mozilla Firefox 3.x, open
page:
https://192.168.1.1
.