
NOTE:
This section lists some of the steps required to configure a Factory Integrated Model. To ensure only valid
configurations are ordered, HP recommends the use of an HP approved configurator. Contact your local sales
representative for information on CTO product offerings and requirements.
NOTE:
HP does not allow factory integration of options into standard models listed above. Configure-to-order servers must
start with a CTO Chassis.
NOTE:
FIO indicates that this option only available as a Factory Installable Option.
Step 1: Base Configuration (choose one of the following configurable models)
Models
HP DL120G6 NHP CTO Chassis
490933-B21
Includes:
Embedded NC107i Gigabit Server Adapter
1 full length PCI Express Gen2 x16 slot (x16 connector) and 1 half length low
profile PCI Express x4 slot (x8 connector)
HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
HP DL120G6 HP CTO Chassis
583183-B21
Includes:
Embedded NC107i Gigabit Server Adapter
Hot-Plug drive cage, including cables
1 full length PCI Express x16 slot (x16 lane) and 1 half length low profile PCI
Express x4 slot (x8 lane)
HP Smart Array B110i SATA RAID Controller (RAID 0/1/1+0)
Rack (1U) form factor, (1.7 in/4.32 cm)
Fixed, mounting rails
Step 2: Choose Required Options (only one of the following from each list unless
otherwise noted)
HP Processor
Quad-Core
Intel® Xeon® processor HP X3430 (2.40GHz, 95W, 8MB, 1333, Turbo 1/1/2/3),
FIO
581869-L21
Intel® Xeon® processor HP X3440 (2.53GHz, 95W, 8MB, 1333, HT, Turbo
1/1/2/3), FIO
578471-L21
Intel® Xeon® processor HP X3450 (2.67GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/4), FIO
581870-L21
Intel® Xeon® processor HP X3460 (2.80GHz, 95W, 8MB, 1333, HT, Turbo
1/1/4/5), FIO
578473-L21
Intel® Xeon® processor X3470 processor (2.93GHz, 95W, 8MB, 1333, HT,
Turbo 1/1/4/5), FIO
578475-L21
Dual-Core Processors
Intel® Celeron® processor G1101 (2.26GHz, 73W, 2MB, 1066), FIO
599309-L21
Intel® Pentium® processor G6950 (2.8GHz, 73W, 3MB, 1066), FIO
599308-L21
Intel® Xeon® processor L3406 (2.28GHz, 30W, 4MB, 1066, HT, Turbo 2/2), FIO
611530-L21
Intel® Core™ processor i3-530 (2.93GHz, 73W, 4MB, 1333, HT), FIO
599310-L21
Intel® Core™ processor i3-540 (3.06GHz, 73W, 4MB, 1333, HT), FIO
599311-L21
HP Memory
Unbuffered with ECC DIMMs (UDIMM)
HP 1GB (1x1GB) Single Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
500668-B21
HP 2GB (1x2GB) Dual Rank x8 PC3-10600 (DDR3-1333) Unbuffered CAS-9
Memory Kit
500670-B21
QuickSpecs
HP ProLiant DL120 Generation 6
Configuration Information - Factory Integrated Models
DA - 13504 Worldwide QuickSpecs — Version 8 — 8/20/2010
Page 13