HP Data Protector A.06.11, Руководство по интеграции

Страница: 237 / 500

4. Verify the restore using
testbar2
:
Execute the following to ensure that restore is possible:
/opt/omni/bin/testbar2 –type:SAP –appname: ORACLE_SID
–perform:restore –file: file_name -bar barlist_name -object
objectName
If it fails, proceed as follows:
• Check the backup session - was it successful?
• Check that the files are in the Data Protector database.
• Check the user rights. Was the a restore started under the correct SAP user
account
• Call a support representative for assistance.
5. Verify the restore using
backint
:
backint
is the same command used by the SAP backup utility.
/opt/omni/lbin/backint –f restore –u ORACLE_SID -i
input_file
where
input_file
specifies what will be restored;
backint
expects the list
of files in the following format:
backint_ID_1 pathName_1 [ targetDirectory_1 ]
backint_ID_2 pathName_2 [ targetDirectory_2 ]
backint_ID_3 pathName_3 [ targetDirectory_3 ]
To retrieve the
backint_ID
numbers, enter the following command:
echo "#NULL #NULL" | backint –f inquiry –u ORACLE_SID
or, alternatively, you can just specify
#NULL
as
backint_ID_1
in the
input_file
. In this case, the latest backup session for the file is used for the
restore.
If it fails, proceed as follows:
• Check the backup session - was it successful?
• Check that the files are in the Data Protector database.
• Check the user rights. Was the restore started under the correct SAP user
account?
• Call a support representative for assistance.
Zero downtime backup integration guide 237