HP D6030A - NetServer - E50, Начало работы

Страница: 21 / 57

Chapter 4 Backing Up Your Data
17
4. Choose a tape drive from the menu of available tape drives, then click
Next.
NOTE
If the tape in the selected drive contains data from a previous
Replica backup, the Wizard asks you to confirm the
overwriting of the data based upon the new configuration.
The Wizard displays the Drive Selection window listing HP NetServer
drives that are available for backup.
By default, each drive appears with a red check mark indicating that it is
designated for backup.
5. Click the drive icons in the drive list to deselect the drive or drives that
you don’t want backed up. For example:
Figure 4-2. Drive Selection Window
IMPORTANT The Wizard won’t permit you to choose more data than it
estimates will fit on a tape in a compressed form (20 GB). If it
detects a problem, a warning message appears, asking you
reselect the drives.
6. Click Next to proceed to the Backup Schedule window where you set the
time of day for the backup, and select either a five-day or seven-day
schedule for daily backups.