HP d325 Series Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 78

background image

B

Hard Drive Installation Guidelines

Using the Cable-Select Feature with Ultra ATA
Devices

Optional drives and optional drive cables are available from HP in kits. The
configuration of the drive employs a cable-select feature that identifies the drive as
device 0 (primary drive) or device 1 (secondary drive).

Device 1 is the drive connected to the middle cable connector. Device 0 is the drive
connected to the end cable connector (applies only to 80-conductor ATA cables). See

“Guidelines for Installing Ultra ATA Devices”

in this appendix for an example of an

Ultra ATA cable.

HP hard drives ship with jumpers preset to cable-select mode; therefore, no jumper
setting changes on the existing or optional drives are required. If you purchase a
third-party hard drive, refer to the documentation included with the kit to ensure
proper installation and configuration of cables.

If installing a second device on the primary controller, you must use an 80-conductor
Ultra ATA cable for optimal performance. This cable is standard on select models.

Guidelines for Installing Ultra ATA Devices

When installing additional Ultra ATA drives, follow these guidelines:

If using multiple Ultra ATA devices, HP recommends that the devices be split
between the primary and secondary Ultra ATA channels for optimum
performance. Use an additional Ultra ATA cable to connect the additional device
to the system board.

80-conductor Ultra ATA cable:

Hardware Reference Guide

B-1

«
...
53
54
55
56
57
...
»

Содержание d325 Series















































































Отзывы:

Нет отзывов

Похожие инструкции для d325 Series

TRS-80 Model II

Бренд: Tandy Страницы: 104

Бренд: Quanmax Страницы: 63

DESKMINI SERIES

Бренд: ASROCK Страницы: 70

Бренд: Arista Страницы: 47

Бренд: Korg Страницы: 233

Бренд: Lakeside Industries Страницы: 26

Бренд: Toshiba Страницы: 2

PX30 - A Series

Бренд: Toshiba Страницы: 147

Бренд: Toshiba Страницы: 149

Бренд: Toshiba Страницы: 143

Бренд: Toshiba Страницы: 162

Бренд: Toshiba Страницы: 174

mini NB250 series

Бренд: Toshiba Страницы: 222

Бренд: Toshiba Страницы: 236

Бренд: Toshiba Страницы: 270

Бренд: Toshiba Страницы: 279

Бренд: Toshiba Страницы: 159

Portege R400 Series

Бренд: Toshiba Страницы: 369

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды