English 11
HP Ergo 1024 User’s Guide
Care and Cleaning
Care and Cleaning
Do not place anything on top of the display. Doing so may block the display
vents and cause damage to the display due to overheating.
Do not let liquid get on or into the display.
To maximize screen life and prevent damage to the picture tube (such as
etching
due to leaving the same image on the screen for a long time), it is
recommended that you:
•
Use the display power management system (on HP Vectra PCs) and a
screen saver program.
•
Avoid setting contrast and brightness to their maximum levels for
prolonged periods.
•
Degauss at least every few days to remove any color impurities. Degaussing
is accompanied by brief instability of the displayed image and a brief
humming sound.
•
Switch the display off, or reduce brightness and contrast to minimum levels,
when the display is not in use and if you do not have a power management
system or a screen saver program.
Your display has an anti-static screen coating. To prevent damage to the
display screen’s coating, use a regular household glass cleaner when cleaning
the screen. To clean the screen:
1
Switch the display off and remove the power plug (pull the plug, not the
cable).
2
Wet a soft cotton cloth with the cleaning solution and gently wipe the
screen. Do not spray cleaner onto the screen because the cleaner may drip
inside the display.
3
Dry with a clean, soft cotton cloth.
Do not use cleaning solutions containing fluoride, acids, or alkalis. The screen
coating can become scratched, or otherwise damaged, through the use of
sharp objects.
tahit-uk.bk : english.fb4 Page 11 Tuesday, July 8, 1997 10:35 AM
