7–4
Software Guide
Setup, Diagnostic and Support Utilities
Setting a Setup Utility Access Preference
You can access the Setup utility only while a blinking cursor is
displayed during startup. The time in seconds that the cursor is
displayed can be set in the Setup utility:
1. To open the Setup utility, turn on or restart the tablet PC.
While the Compaq logo is displayed and a cursor is flashing
in the upper right corner of the screen, press the esc button on
the tablet PC, or press
F10
on an optional keyboard.
To change the language, select Advanced > Languages. To
navigate and select without using an optional keyboard, rotate
the jog dial to scroll and press the jog dial inward to select. To
navigate and select using an optional keyboard, use the arrow
and
enter
keys.
2. Select the Advanced menu > Section 508 Compliance.
3. Select the time in seconds that you want the flashing cursor to
display during startup, then press
enter.
4. On the Exit menu, select Exit Saving Changes.
Your preference is set as you exit the Setup utility and is in effect
when the tablet PC restarts.
280125-001.book
Page
4
Sunday,
August
25,
2002
3:51
PM
