Bezel Blanks
Description
Spare part number
5.25-inch bezel blank
570838-001
On some models, there are bezel blanks covering the 3.5-inch and 5.25-inch external drive bays that
need to be removed before installing a drive. To remove a bezel blank:
1.
Remove the access panel (
Computer Access Panel on page 50
).
2.
Remove the front bezel (
)..
3.
To remove a bezel blank, push the two retaining tabs that hold the bezel blank in place towards
the outer right edge of the bezel
(1)
and slide the bezel blank back and to the right to remove it
(2)
.
Figure 7-4
Removing a Bezel Blank
4.
Replace the front bezel.
52
Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
