![HP Compaq Pro 4300 Скачать руководство пользователя страница 91](http://html.mh-extra.com/html/hp/compaq-pro-4300/compaq-pro-4300_maintenance-and-serice-manual_2173643091.webp)
Front Bezel
The front bezel is located on the front of the computer and is secured to the main system bracket with
five Torx screws and nine tabs.
You can remove the front bezel without disassembling many of the computer's components. Most
components can remain attached to the base pan. The following procedure demonstrates removing
the bezel while removing the smallest number of components possible.
To remove the front bezel:
1.
Prepare the computer for disassembly (see
Preparing to Disassemble the Computer
on page 33
).
2.
Remove the center access panel (see
Hinge Cover Panel on page 34
).
3.
Remove the memory access panel (see
Memory Access Panel on page 36
).
4.
Remove the drive access panel (see
Drive Access Panel on page 38
).
5.
Remove the top panel (see
Top Panel on page 58
).
6.
Remove the rear cover (see
Rear Cover on page 62
).
7.
Remove the speakers (see
Speakers on page 73
).
8.
Remove the power switch assembly cable from the front bezel. You do not have to remove the
remaining cables.
9.
Remove the five black Torx screws that secure the bezel to the main system bracket assembly.
10.
Lift the nine tabs (see arrows in image) that secure the bezel to the main system bracket
assembly. Be sure to slide the bracket free from the tabs as you lift each one.
84
Chapter 6 Removal and Replacement Procedures All-in One (AIO) Chassis