background image

HP StorageWorks Disk System 2100 / 2110

24

FIGURE 13

Sample Hardware Event Notification 

Notification Time:  Wed Feb 3 11:27:15 1999

yourserver sent Event Monitor notification information:

/storage/events/disks/default/10_4_4_0.0 is >=1.
Its current value is CRITICAL(5)

Event data from monitor:

Event Time: Wed Feb 3 11:27:15 1999
Hostname: yourserver.rose.hp.com      IP Address : 15.43.213.13
Event ID: 0x0036b8a313000000002       Monitor    : disk_em
Event # : 100037                      Event Class: I/O
Severity : CRITICAL

Disk at hardware path 10/4/4/0.0 : Media failure 
Associated OS error log entry id(s) : 000000000000000000

Description of Error:

     The device was unsuccessful in reading data for the current I/

O request due to an error on the medium. The data could not be 
recovered. The request was likely processed in a way which 
could cause damage to or loss of data.

Probable Cause / Recommended Action:

     The medium in the device is flawed. If the medium is removable, 

replace the medium with a fresh one. Alternatively, if the 
medium is not removable, the device has experienced a hardware 
failure. Repair or replace the device, as necessary.

Содержание Compaq Presario,Presario 2100











































Отзывы: