manualshive.com logo in svg

HP Compaq Presario CQ56, Руководство по техническому обслуживанию и ремонту, Страница: 2 / 110

Поделиться
Скачать
HP Compaq Presario CQ56 Скачать руководство пользователя страница 2

© Copyright 2010 Hewlett-Packard
Development Company, L.P.

AMD, ATI, and Athlon are trademarks of
Advanced Micro Devices, Inc. Bluetooth is
a trademark owned by its proprietor and
used by Hewlett-Packard Company under
license. Intel, Celeron, and Pentium are
trademarks of Intel corporation in the U.S.
and other countries. Microsoft and Windows
are U.S. registered trademarks of Microsoft
Corporation.

The information contained herein is subject
to change without notice. The only
warranties for HP products and services are
set forth in the express warranty statements
accompanying such products and services.
Nothing herein should be construed as
constituting an additional warranty. HP shall
not be liable for technical or editorial errors
or omissions contained herein.

First Edition: August 2010

Document Part Number: 621594-001

Содержание Compaq Presario CQ56















































































































Отзывы:

Нет отзывов