HP Compaq NX7300, Руководство по техническому обслуживанию и ремонту

Страница: 200 / 242

B–4 Maintenance and Service Guide
Backup and Recovery in Windows Vista
To back up your entire hard drive:
1. Select Start > All Programs > HP Backup & Recovery >
Backup and Recovery Manager .
2. Click Next .
3. Click Back up to protect system settings and important
data files, and then click Next .
4. Click Back up entire hard drive, and then click Next .
5. Follow the on-screen instructions.
Creating Recovery Points
When you back up modifications since your last backup, you are
creating system recovery points. This allows you to save a
snapshot of your hard drive at a specific point in time. You can
then recover back to that point if you want to reverse subsequent
changes made to your system.
✎
The first system recovery point, a snapshot of the entire image,
is automatically created the first time you perform a backup.
Subsequent recovery points make copies of changes made after
that time.
HP recommends that you create recovery points at the following
times:
■
Before you add or extensively modify software or hardware
■
Periodically, whenever the system is performing optimally
✎
Recovering to an earlier recovery point does not affect data
files or e-mails created since that recovery point.
To create a system recovery point:
1. Select Start > All Programs > HP Backup & Recovery >
Backup and Recovery Manager .
2. Click Next .