3–16
Hardware Guide
Battery Packs
To fully discharge a battery pack:
1. Select the power icon on the taskbar, or access the Power
Schemes tab:
❏
In Windows 2000,
select Start > Settings > Control
Panel > Power Management icon > Power Schemes tab.
❏
In Windows XP,
select Start > Control Panel >
Performance and Maintenance > Power Options icon >
Power Schemes tab.
2. Make a note of the 2 settings in the Plugged In column and
the 2 settings in the Running on Batteries column so that you
can reset them after the calibration.
3. Use the drop-down lists to set the 4 options (2 in each
column) to Never.
4. Select the OK button.
5. Disconnect the notebook from the external power source, but
do
not
turn off the notebook.
6. Run the notebook on battery power until the battery pack is
fully discharged. The battery light begins to blink when the
battery pack has discharged to a low-battery condition. When
the battery pack is fullly discharged, the battery light turns off
and the notebook shuts down.
333955-001.book Page 16 Monday, July 14, 2003 11:27 AM
