HP Compaq dx2308 Скачать руководство пользователя страница 10

Страница: 10 / 102

HP Backup and Recovery Manager

The HP Backup and Recovery Manager is an easy-to-use, versatile application that is pre-loaded on each

system and allows you to:

●

create Recovery Points to back up the entire system incrementally

●

back up the entire system in a single hard archive

●

back up individual files

Backups can be scheduled to occur automatically at designated intervals, or they can be initiated

manually. Recovery can be performed from the Recovery Partition on the hard drive or the Recovery Disc

Set. The Recovery Disc Set includes the

Restore Plus!

CD, the Microsoft Operating System, and any

Supplemental Software CDs.

NOTE:

HP highly recommends that you create a Recovery Disc Set immediately before using the

computer and schedule regular automatic Recovery Point backups.

To create the Recovery Disc Set:

Click

Start

HP Backup and Recovery

HP Backup and Recovery Manager

to open

the Backup and Recovery Wizard, then click

Next

Select

Create factory software recovery CDs or DVDs to recover the system

Follow the instructions in the wizard.

The HP Backup and Recovery Manager provides two basic recovery methods. The first, recovery of files

and folders, operates in Windows. The second, PC Recovery, requires a reboot to the Recovery Partition

or from the Recovery Disc Set. To reboot to the Recovery Partition, press F11 at startup when you see the

message “Press F11 for Emergency Recovery.”

NOTE:

For more information on using HP Backup and Recovery Manager, refer to the

HP Backup

and Recovery Manager User Guide

by selecting

Start

HP Backup and Recovery

Backup and Recovery Manager Manual

You can order a Recovery Disc Set from HP by calling the HP support center. Go to the following

Web site, select your region, and click the

Technical support after you buy

link under the

Call HP

heading to obtain the support center telephone number for your region.

http://welcome.hp.com/country/us/en/wwcontact_us.html

Chapter

Install the Operating System

ENWW

Содержание Compaq dx2308







































































































Результаты поиска

Содержание Compaq dx2308

Отзывы:

Бренды по названию

Популярные бренды

HP Compaq dx2308, Руководство по обслуживанию и справочник

Результаты поиска

Содержание Compaq dx2308

Отзывы:

Бренды по названию

Популярные бренды