Computer Setup (F10) Utility Guide
www.hp.com
15
Computer Setup (F10) Utility
PnP/PCI
Configuration
(continued)
IRQ Resources
• IRQ-3 assigned to
• IRQ-4 assigned to
• IRQ-5 assigned to
• IRQ-7 assigned to
• IRQ-9 assigned to
• IRQ-10 assigned to
• IRQ-11assigned to
• IRQ-12 assigned to
• IRQ-14 assigned to
• IRQ-15 assigned to
When resources are controlled manually,
allows you to assign each system interrupt a
type, depending on the type of device using
the interrupt.
Legacy ISA for devices compliant with the
original PC AT bus specification, PCI/ISA
PnP for devices compliant with the
Plug-and-Play standard whether designed for
PCI or ISA bus architecture.
Maximum Payload Size
Allows you to set TLP payload size for the PCI
Express Devices to (in bytes):
• 128
• 256
• 512
• 1024
• 2048
• 4096
PC Health
Status
CPU Temperature
(view only)
CPU Fan Speed
(view only)
System Fan Speed
(view only)
System Fan Fault Check
Disables/enables detection of fan during
POST.
Load
Optimized
Defaults
Allows you to reset Computer Setup to
factory defaults.
Computer Setup
(Continued)
Heading
Option
Description
✎
Support for specific Computer Setup options may vary depending on the hardware
configuration.
