manualshive.com logo in svg

HP Compaq dc71 Series, Техническое справочное руководство, Страница: 44 / 212

Поделиться
Скачать
HP Compaq dc71 Series Скачать руководство пользователя страница 44

2-28

361834-002

Technical Reference Guide

System Overview

2.4.9 Graphics Subsystem

These systems use the 82915G or 82915GV GMCH component that integrates an Intel graphics 
controller that can drive an external VGA monitor. The integrated graphics controller (IGC) 
features a 333-MHz core processor and a 400-MHz RAMDAC. The controller implements 
Dynamic Video Memory Technology (DVMT 3.0) for video memory. Table 2-5 lists the key 
features of the integrated graphics subsystem. 

The IGC of the 82915G used in the SFF, ST, MT, and CMT form factors supports upgrading 
through a PCI Express x16 graphics slot.  The IGC of the 82915GV used in the USDT form 
factor does not support a PCI Express x16 graphic slot and may only be upgraded through the 
PCI 2.3 slot.

2.4.10 Audio Subsystem

These systems use the integrated AC97 audio controller of the chipset and the ADI 1981B audio 
codec. These systems include microphone and line inputs and headphone and line outputs and 
include a 3-watt output amplifier driving an internal speaker.  All models feature front 
panel-accessible microphone in and headphone out audio jacks as standard.

Table 2-5

Integrated Graphics Subsystem Statistics

82915G or GV GMCH

Integrated Graphics Controller

Recommended for:

Hi 2D, Entry 3D

Bus Type

Int. PCI Express

Memory Amount

8 MB pre-allocated

Memory Type

DVMT 3.0

DAC Speed

400 MHz

Maximum 2D Res.

2048x1536 @ 85 Hz

Software Compatibility

Quick Draw,

DirectX 9.0,

Direct Draw,

Direct Show,

Open GL 1.4,

MPEG 1-2,

Indeo

Outputs

1 RGB

Содержание Compaq dc71 Series





















































































































































































































Отзывы:

Нет отзывов