HP Compaq dc5700 Small Form Factor Business, Инструкции по разборке устройства в конце срока службы

Страница: 3 / 15

h. Remove the top PCA from the power supply.
i. Cut the two large capacitors from the PCA (see Figure 11).
j. Remove two screws from the black plastic piece on the bottom of the inside of the power supply
(see Figure 12).
k. Remove the remaining two screws from the PCA on the bottom of the inside of the power supply
(see Figure 13).
l. Cut all wires from the bottom PCA.
m. Remove the PCA from the power supply.
n. Cut three capacitors (see Figure 14).
POWER SUPPLY 2
a. Remove five screws from the top the power supply (see Figure 15).
b. Remove the three screws from the bottom of the power supply (see Figure 16).
c. Cut the plastic tie that secures the wires to the cover (see Figure 16).
d. Remove the cover from the power supply.
e. Remove the two screws from the PCA on the top of the inside of the power supply (see Figure 17).
f. Cut all wires from the top PCA.
g. Remove the top PCA from the power supply.
h. Remove the four screws from the PCA on the bottom of the inside of the power supply (see Figure
18).
l. Cut all wires from the bottom PCA.
m. Remove the PCA from the power supply.
n. Cut eight capacitors (see Figure 19).
POWER SUPPLY 3
a. Remove five screws from the top the power supply (see Figure 20).
b. Remove the three screws from the bottom of the power supply (see Figure 21).
c. Cut the plastic tie that secures the wires to the cover (see Figure 21).
d. Remove the cover from the power supply.
e. Remove the four screws from the PCA on the top of the inside of the power supply (see Figure
22).
f. Cut all wires from the top PCA.
g. Remove the top PCA from the power supply.
h. Cut the two large capacitors from the PCA (see Figure 23).
i. Remove the four screws from the PCA on the bottom of the inside of the power supply (see Figure
24).
j. Cut all wires from the bottom PCA.
k. Remove the PCA from the power supply.
l. Cut two capacitors and the small PCA (see Figure 25).
3.2 Optional Graphic. If the disassembly process is complex, insert a graphic illustration below to identify
the items contained in the product that require selective treatment (with descriptions and arrows identifying
locations).