Table 3-6
Computer Setup—Advanced (continued)
Execute Memory
Test
(some models)
Restarts the computer and executes the POST memory test/logging.
BIOS Power-On
Allows you to set the computer to turn on automatically at a time you specify.
PCI Devices
●
Lists currently installed PCI devices and their IRQ settings.
●
Allows you to reconfigure IRQ settings for these devices or to disable them entirely. These
settings have no effect under an ACPI-based operating system.
Bus Options
On some models, allows you to enable or disable:
●
PCI SERR# Generation.
●
PCI VGA Palette Snooping, which sets the VGA palette snooping bit in PCI configuration
space; only needed when more than one graphics controller is installed.
Device Options
Allows you to set:
●
Num Lock State at Power-On (off/on).
●
S5 Wake on LAN (enable/disable).
◦
To disable Wake on LAN during the off state (S5), use the arrow (left and right) keys to
select the
Advanced
>
Device Options
menu and set the
S5 Wake on LAN
feature
to
Disable
. This obtains the lowest power consumption available on the computer during
S5. It does not affect the ability of the computer to Wake on LAN from suspend or
hibernation, but will prevent it from waking from S5 via the network. It does not affect
operation of the network connection while the computer is on.
◦
If a network connection is not required, completely disable the network controller (NIC)
by using the arrow (left and right) keys to select the
Security
>
Device Security
menu.
Set the
Network Controller
option to
Device Hidden
. This prevents the network
controller from being used by the operating system and reduces the power used by the
computer in S5.
●
Multi-Processor (enable/disable). This option may be used to disable multi-processor support
under the OS.
●
Internal Speaker (some models) (does not affect external speakers).
●
NIC Option ROM Download (PXE, Disable, iSCSI). The BIOS contains an embedded NIC
option ROM to allow the unit to boot through the network to a PXE server. This is typically used
to download a corporate image to a hard drive. The NIC option ROM takes up memory space
below 1MB commonly referred to as DOS Compatibility Hole (DCH) space. This space is
limited. This F10 option will allow users to disable the downloading of this embedded NIC
option ROM thus giving more DCH space for additional PCI cards which may need option
ROM space. The default will be to have the NIC PXE option-ROM-enabled.
Computer Setup (F10) Utilities
21
Содержание Compaq 6000 Pro SFF
Страница 1: ...Maintenance Service Guide HP Compaq 6000 Pro All in One PC ...
Страница 4: ...iv About This Book ...
Страница 8: ...viii ...
Страница 41: ...6 Illustrated parts catalog Computer major components Computer major components 33 ...
