HP Compaq 500B Microtower Скачать руководство пользователя страница 83

Страница: 83 / 108

High pitched noise coming from inside a flat panel monitor.

Cause

Solution

Brightness and/or contrast settings are too high.

Lower brightness and/or contrast settings.

Solving Audio Problems

If the computer has audio features and you encounter audio problems, see the common causes and
solutions listed in the following table.

Table C-6

Solving Audio Problems

Sound cuts in and out.

Cause

Solution

Processor resources are being used by other open
applications.

Shut down all processor-intensive applications or cut down the
number of applications running.

No sound.

Cause

Solution

Volume has been muted or lowered.

Double-click the speaker icon on the taskbar, and clear the
Mute All check box or adjust the volume level.

External speakers are not turned on.

Turn on the external speakers.

External speakers are plugged into the wrong audio jack.

Check the sound card documentation for proper speaker
connection.

A device, such as headphones, is connected to the line-out
jack.

Turn on and use headphones or external speakers—only
connect to one device at a time.

Solving Keyboard and Mouse Problems

If you encounter keyboard or mouse problems, see the documentation that came with the equipment
and to the common causes and solutions listed in the following table.

Table C-7

Solving Keyboard Problems

Keyboard commands and typing are not recognized by the computer.

Cause

Solution

Keyboard connector is not properly connected.

Replace the keyboard.

Computer will not respond to a USB keyboard or mouse.

Cause

Solution

The keyboard or mouse is not connected to the computer.

Make sure that the keyboard and mouse cables are connected
to the computer.

Table C-5

Solving Display Problems (continued)

Solving Audio Problems

Содержание Compaq 500B Microtower













































































































Результаты поиска

Содержание Compaq 500B Microtower

Отзывы:

Похожие инструкции для Compaq 500B Microtower

Бренды по названию

Популярные бренды

HP Compaq 500B Microtower, Руководство по техническому обслуживанию и ремонту

Результаты поиска

Содержание Compaq 500B Microtower

Отзывы:

Похожие инструкции для Compaq 500B Microtower

Бренды по названию

Популярные бренды