HP Color LaserJet CP3505 Series, Дополнение к техническому справочнику программного обеспечения

Страница: 9 / 170

Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
There is no support for the direct USB port access with the
ciof_open()
function in the I/O filter kit.
Description:
For some products, the
ciof_open()
function in the I/O filter kit supported two handles for opening
direct connections to the USB ports. The following two handles were supported:
●
/dev/usb -- standard USB
●
/dev/usb.4 -- USB over 1284.4
In the 220-IOF-1.0.0 release, neither of these handles are documented in the I/O Filter API as supported
options. The implementation of
ciof_open()
function used in the kit seems to make use of these
handles. When an attempt is made to use either of these handles, the open attempt fails.
Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
When a Letter and Envelope DL print job set for Tray 2 is overridden and instead Tray 1 is selected, a
49.205A ERROR displays on the control panel.
Description:
Even though Tray 1 is manually selected, srcDest continues to select Tray2, which does not support
envelopes.
Solution:
At this time, this issue is not scheduled to be fixed.
Issue (Internal):
When OVERRIDE A4/LETTER equals YES , a letter print job sent to Tray 1 cannot be changed to A4
on the control panel.
Description:
The following steps were used to produce this issue:
1. Set Tray 1 for A4 Plain , but leave empty.
2. Send a letter, plain print job to Tray 1. The control panel displays a Load Tray1 Plain Letter
message.
3. Load A4 paper into Tray 1.
4. When a size pop-up message appears, press the Back arrow button on the control panel.
5. Select the USE ANOTHER TRAY and USE TRAY 1 A4 PLAIN options. Tray1 A4 cannot be
selected, and the control panel still displays a Load Tray1 Plain Letter message.
ENWW General firmware [INTERNAL] 3
Known is
sues