HP Chromebook x360 14a-cb0 Series, Руководство по техническому обслуживанию и ремонту, Страница: 45 / 71

2. Disconnect the power adapter cable from the system board.
Reverse this procedure to install the power adapter cable.
Display assembly
To remove and disassemble the display assembly, use these procedures and illustrations.
Full hinge-up displays are not available as spare parts. Spare parts for displays are available only at the
subcomponent level.
Before removing the display assembly, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 27 ).
2. Remove the bottom cover (see Bottom cover on page 27 ).
3. Disconnect the battery cable from the system board (see Battery on page 29 ).
Remove the display assembly:
1. Remove the WLAN shield (1).
The WLAN shield is available using spare part number M33459-001.
2. Carefully disconnect the two antenna cables from the WLAN module (2).
3. Release the WLAN antenna cables from the retention clip (3) built into the top cover/keyboard.
4. Disconnect the webcam/microphone module cable (4) from the system board.
5. Release the webcam/microphone module cable from the retention clips (5) built into the top cover/
keyboard.
6. Release the adhesive strip (6) that secures the display panel cable to the system board.
7. Disconnect the display panel cable (7) from the system board.
Display assembly 39