manualshive.com logo in svg

HP Chromebook x360 12b, Руководство по техническому обслуживанию и ремонту

Поделиться
Скачать
HP Chromebook x360 12b Скачать руководство пользователя страница 46

Reverse this procedure to install the touchpad and cable.

System board

Table 5-6

  System board description and spare part number information

Description

Spare part number

Equipped with an Intel Pentium N5000 1.1-GHz (turbo up to 2.7-GHz) processor (2400 MHz FSB, 4-MB L2 
cache, quad core, 6 W), a graphics subsystem with UMA memory, 8-GB of system memory, 64-GB of eMMC 
storage, and a non-Windows 10 operating system

L70811-001

Equipped with an Intel Pentium N5000 1.1-GHz (turbo up to 2.7-GHz) processor (2400 MHz FSB, 4-MB L2 
cache, quad core, 6 W), a graphics subsystem with UMA memory, 4-GB of system memory, 64-GB of eMMC 
storage, and a non-Windows 10 operating system

L70810-001

Equipped with an Intel Celeron N4000 1.1-GHz (turbo up to 2.6-GHz) processor (2400 MHz FSB, 4-MB L2 
cache, dual core, 6 W), a graphics subsystem with UMA memory, 4-GB of system memory, 64-GB of eMMC 
storage, and a non-Windows 10 operating system

L70809-001

Equipped with an Intel Pentium N5000 1.1-GHz (turbo up to 2.7-GHz) processor (2400 MHz FSB, 4-MB L2 
cache, quad core, 6 W), a graphics subsystem with UMA memory, 4-GB of system memory, 32-GB of eMMC 
storage, and a non-Windows 10 operating system

L70808-001

Before removing the system board, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then 
unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 22

).

5.

Remove the battery (see 

Battery on page 24

).

6.

Remove the WLAN module (see 

WLAN module on page 25

).

Remove the system board:

1.

Disconnect the following cables from the system board:

(1) Webcam/microphone module cable

(2) Speaker cable

(3) Display panel cable

(4) Keyboard ZIF connector cable

(5) USB/audio board low-power ZIF connector cable

(6) USB/audio board high-power ZIF connector cable

(7) Touchpad ZIF connector cable

40

Chapter 5   Removal and replacement procedures

Содержание Chromebook x360 12b































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды