USB port board cable
NOTE:
The USB port board spare part kit does not includes the USB port board cable. The USB port board cable
is included in the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Before removing the USB port board cable, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4.
Remove the keyboard/top cover (see
Keyboard/top cover on page 20
).
5.
Disconnect the battery cable from the system board (see
Battery on page 25
).
Remove the USB port board cables:
1.
Release the two ZIF connectors (1) to which the USB port board cables are connected, and then disconnect
the USB port board cables from the system board.
2.
Release the two ZIF connectors (2) to which the USB port board cables are connected, and then disconnect
the USB port board cables from the USB port board.
3.
Detach the USB port board cables (3) from the bottom cover. (The USB port board cables are attached to
the bottom cover with double-sided adhesive.)
4.
Remove the USB port board cable (4).
Reverse this procedure to install the USB port board cable.
28
Chapter 5 Removal and replacement procedures
