manualshive.com logo in svg

HP Chromebook 11-21 SERIES, Руководство по техническому обслуживанию и ремонту, Страница: 27 / 57

Поделиться
Скачать
HP Chromebook 11-21 SERIES Скачать руководство пользователя страница 27

To install the rubber feet, remove the protective backing from the rubber feet and install them in 
the locations indicated in the above illustration.

Keyboard/top cover

Description

Spare part number

Description

Spare part number

Keyboard/top cover in anodized silver finish (includes 
keyboard cable):

For use in Latin America

783090-161

For use in Belgium

783090-A41

For use in the Netherlands

783090-B31

For use in Canada

783090-DB1

For use in Russia

783090-251

For use in Denmark, Finland, 
and Norway

783090-DH1

For use in Spain

783090-071

For use in France

783090-051

For use in Switzerland

783090-BG1

For use in Germany

783090-041

For use in the United Kingdom

783090-031

For use in Italy

783090-061

For use in the United States

783090-001

Before removing the keyboard/top cover, follow these steps:

1.

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect the power from the computer by unplugging the power cord from the computer.

3.

Disconnect all external devices from the computer.

4.

Remove the 2 rear computer feet (see 

Computer feet on page 20

).

NOTE:

When replacing the keyboard/top cover, be sure that the heat sink (see 

Heat sink on page 26

) and 

TouchPad (see 

TouchPad board on page 27

) are removed from the defective keyboard/top cover and 

installed on the replacement keyboard/top cover.

Remove the keyboard/top cover:

1.

Remove the two rubber screw covers (1).

NOTE:

The rubber screw covers are included in the Rubber Kit, spare part number 822631-001.

Component replacement procedures

21

Содержание Chromebook 11-21 SERIES


























































Отзывы:

Нет отзывов