manualshive.com logo in svg

HP C1104 Series, Руководство пользователя

Поделиться
Скачать
HP C1104 Series Скачать руководство пользователя страница 3

3

Capacity Upgrade For C1104/05 Jukeboxes

 ESD Precautions

The optical disk jukebox contains very sensitive electrical components.  It is EXTREMELY IMPOR-
TANT that you follow the proper procedures for preventing ESD (Electrostatic Discharge).  Use wrist-
grounding straps, anti-static mats, and anti-static work stations when removing and replacing the
major assemblies.

Tools Required

The following tools are needed for assembly/disassembly of the autochanger:

• Torx driver with the following bits: T-10, T-15, T-20

• 1/4-inch hex nut driver

a. After you install this capacity upgrade (C1159F/G/H), you are able to install 1

or more 2-drive upgrades ( C1158F/G/H).

Before upgrade:
(# of drives and slots)

Upgraded to the equivalent of a:

C1104F/G/H
(4 drives, 128 slots)
C1105F/G/H
(6 drives, 128 slots)

C1107F/G/H (238 slots)

a

Table 1: C1104/05 Series Capacity Upgrade Options

Caution

Failure to follow proper procedures could lead to intermittent
failures and/or premature hard failures in the disk controller
and mechanism.

Содержание C1104 Series



















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды