[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] VC-Enet
[Bay 7] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] VC-Enet
[Bay 8] VC-Enet
[Bay 1] VC-Enet
[Bay 3] Other/empty
[Bay 5] VC-FC
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] Other/empty
[Bay 6] VC-FC
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 5] VC-FC
[Bay 7] Empty
[Bay 2] VC-Enet
[Bay 4] VC-FC
[Bay 6] VC-FC
[Bay 8] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 5] VC-Enet
[Bay 7] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 6] VC-Enet
[Bay 8] VC-Enet
HP BladeSystem c3000 Enclosure
NOTE:
The following tables show a number of typical, supported configurations for an HP BladeSystem c3000 Enclosure.
[Bay 1] VC-Enet
[Bay 3] Empty
[Bay 2] VC-Enet
[Bay 4] Empty
[Bay 1] VC-Enet
[Bay 3] VC-Enet
[Bay 2] VC-Enet
[Bay 4] VC-Enet
[Bay 1] VC-Enet
[Bay 3] VC-FC
[Bay 2] VC-Enet
[Bay 4] VC-FC
Stacking Configuration
Stacking is only supported on Virtual Connect Ethernet Modules. The Virtual Connect Fibre
Channel modules are managed via the Virtual Connect Ethernet Modules. The Virtual Connect
firmware is dynamically mirrored between modules so all configuration data is updated
simultaneously in a stack. Fibre Channel data packets are not transmitted between modules in a
stacked configuration.
QuickSpecs
HP 4Gb Virtual Connect Fibre Channel Module for c-
Class BladeSystem
Supported Products
DA - 12673 Worldwide QuickSpecs — Version 5 — 10-1-2007
Page 7
