HP BL536A, Руководство пользователя и обслуживания

Страница: 14 / 165

Figure 1 Front panel overview
2. Mailslot 1. Power button
4. Front panel LCD screen 3. Front panel LEDs
6. Air vents 5. Control buttons
7. Magazine
The operator control panel includes four LEDs that indicate system status information as shown in
Figure 2 (page 14) .
Figure 2 Operator control panel LEDs
Ready . Illuminated when power is on. Blinking when there is tape drive or robotics activity. Green 1.
Clean . Illuminated when the tape drive has determined that a cleaning cartridge should be used.
Cleaning is only necessary when the device directs you to do so. Additional cleaning is not
necessary.
Amber 2.
Attention . Illuminated if the device has detected a condition that requires attention by the operator. Amber 3.
Error . Illuminated if an unrecoverable error occurs. A corresponding error message displays on
the LCD screen (see Troubleshooting (page 86) for more information).
Amber 4.
Back panel overview
The back panel provides access to the drive interface connectors, the tape drive, the power
connector, the Ethernet, serial and USB ports, and the magazine release holes as shown in
Figure 3 (page 14) , Figure 4 (page 15) , and Figure 5 (page 15) .
Figure 3 Back panel overview with parallel SCSI tape drive
2. Fan vent 1. Power connector
4. Magazine release hole 3. Tape drive
6. Serial port (Factory use only) 5. Ethernet port
8. Shipping lock storage location 7. USB port
14 Features and overview