HP B1476 68020, Руководство пользователя, Страница: 89 / 724

To recall entry buffer values
1 Position the mouse pointer over the Recall button just to the right of the entry
buffer text area, and click the mouse button to bring up the Entry Buffer
Value Selection dialog box.
2 In the dialog box, click on the string you want.
3 In the dialog box, click on the "OK" button.
The Entry Buffer Value Selection dialog box contains a list of previous values
from the entry buffer. You can also predefine entries for the Entry Buffer
Value Selection dialog box and define the maximum number of entries by
setting X resources (refer to the “Setting X R esources” chapter).
If you decide not to change the contents of the entry buffer, click on the
"Cancel" button in the dialog box.
If you want the Entry Buffer Value Selection dialog box to remain visible after
you make a selection, press "Apply" instead of "OK". You may drag the dialog
box to another location on your display so that it does not cover the debugger
window.
See the following “To use dialog boxes” section for information about using
dialog boxes.
Chapter 3: Entering Debugger Commands
Using Menus, the Entry Buffer, and Action Keys
65