Table 6 Other countries' counters
Source value
Protocol used
Type
Counter Name
.1.3.6.1.3.94.4.5.1.40
SNMP
FC
CRC Errors
.1.3.6.1.3.94.4.5.1.43
SNMP
FC
Signal Losses
.1.3.6.1.3.94.4.5.1.44
SNMP
FC
Sync Losses
.1.3.6.1.3.94.4.5.1.39
SNMP
FC
Link Failures
.1.3.6.1.3.94.4.5.1.42
SNMP
FC
Sequence Errors
.1.3.6.1.3.94.4.5.1.41
SNMP
FC
Invalid Transmissions
.1.3.6.1.3.94.4.5.1.33
SNMP
FC
Rx Link Resets
.1.3.6.1.3.94.4.5.1.34
SNMP
FC
Tx Link Resets
.1.3.6.1.3.94.4.5.1.28
SNMP
FC
C3 Discard
.1.3.6.1.4.1.1588.4.1.1.5
SNMP
FCIP
Latency
.1.3.6.1.4.1.1588.4.1.1.3
SNMP
FCIP
Dropped Packets
.1.3.6.1.4.1.1588.4.1.1.2
SNMP
FCIP
Link Retransmits
.1.3.6.1.4.1.1588.4.1.1.9
SNMP
FCIP
Timeout Retransmits
.1.3.6.1.4.1.1588.4.1.1.10
SNMP
FCIP
Fast Retransmits
.1.3.6.1.4.1.1588.4.1.1.11
SNMP
FCIP
Duplicate Ack Received
.1.3.6.1.4.1.1588.4.1.1.12
SNMP
FCIP
Window Size RTT
.1.3.6.1.4.1.1588.4.1.1.13
SNMP
FCIP
TCP Out of Order Segments
.1.3.6.1.4.1.1588.4.1.1.14
SNMP
FCIP
SlowStart Status
PortCRC (variable from the return html
file)
HTTP
EE Monitors
CRC Errors
Installation on Network Mounted Drives is not supported.
Installation onto a windows network mounted drive is not supported but installation, if attempted,
is allowed and DB fails to start.
Client disconnects
Under heavy server load or degraded network links, there is a potential for the Network Advisor
client to disconnect from the server. The workaround is to restart the client.
SMI Agent
If SMI client queries CIMOM server for more than one fabric, and if each fabric has a large zone
database (~1MB), then Enumerate Instances operation on
Brocade_ZonemembershipsettingdataInZone
fails. In this scenario, HP recommends that
you use the association traversal approach via Brocade_Fabric to retrieve the larger zone databases.
SMI alert indication BRCD60 is not sent out to SMI clients if Fabric OS switches are discovered
but SNMP trap registration has failed. Ensure that the Network Advisor server is successfully
registered for traps on all switches.
If DCB switches are running Fabric OS 6.3.x, VLAN/ACL deployment through SMI-A fails. You
must upgrade the DCB Fabric OS to 6.4.x/7.0.0a for VLAN/ACL deployment support through
the SMI Agent.
14