HP Aruba 2930F Series Скачать руководство пользователя страница 326

Страница: 326 / 775

Operating Notes

Switch will periodically check with Activate every seven days for the latest image version.

Download the image from the URL provided by Activate and upgrade the switch with the new image.

Restrictions

When a switch is managed by either AirWave or Aruba Central, the automatic firmware check is disabled.

Activate upgrade from the non-supported build is disabled upon upgrading to version 16.03.

Upon upgrade from version 16.02 to version 16.03 with activate provision enabled, activate software update will
be enabled.

activate software-update enable

Syntax

activate software-update [enable | disable]

Description

Enables or disables the Activate software update.

Activate software-update is enabled by default.

Options

disable

Disables the Activate software update.

enable

Enables the Activate software update.

Example

Switch will check with activate for every seven days for latest image available and RMON logs will be generated:

I 10/25/16 14:04:27 05219 activate:

A system software update is available to version WB.16.02.0012.

activate software-update check

Syntax

activate software-update check

Description

Check the Activate software update manually.

Example

switch(config)$# activate software-update check

Configuration and Status - Activate Software Update

326

Aruba 2930F / 2930M Management and Configuration Guide

for ArubaOS-Switch 16.08

Содержание Aruba 2930F Series








































































































































































































































































































































































































































































































































































































































































































































































































Результаты поиска

Содержание Aruba 2930F Series

Отзывы:

Похожие инструкции для Aruba 2930F Series

Бренды по названию

Популярные бренды

HP Aruba 2930F Series, Руководство по управлению и настройке

Результаты поиска

Содержание Aruba 2930F Series

Отзывы:

Похожие инструкции для Aruba 2930F Series

Бренды по названию

Популярные бренды