HP Apollo a6000 Chassis, Руководство по техническому обслуживанию и ремонту

Страница: 34 / 62

Removal and replacement procedures 34
Power cage
To remove the component:
1.
Power down all servers (" Power down the server " on page 20 ).
2.
Remove the management module (" Management module LEDs and buttons " on page 45 ,
" Management module " on page 33 ).
3.
Remove the power cage.
To replace the component, reverse the removal procedure.
Power backplane
To remove the component:
1.
Power down all servers (" Power down the server " on page 20 ).
2.
Disconnect all cables from the chassis.
3.
Remove all servers (" Remove the server " on page 20 ).
4.
Remove the management module (" Management module LEDs and buttons " on page 45 ,
" Management module " on page 33 ).
5.
Remove both power cages (" Power cage " on page 34 ).
6.
Remove all fan modules (" System fans " on page 31 ).
7.
Remove the chassis from the rack (on page 22 ).
8.
Remove the I/O modules (" I/O module " on page 32 ).
9.
Place the chassis on a flat, sturdy surface to support the chassis.