HP AMD Radeon 7000, Руководство по установке

Страница: 9 / 28

1 Overview
This chapter provides a brief overview of the HP PCI AMD Radeon 7000 Graphics Adapter.
Reference to the HP PCI AMD Radeon 7000 Graphics Adapter is also known by its HP Product
Number: AH391A. They are interchangeable.
Module Description
The HP PCI AMD Radeon 7000 Graphics Adapter module is a single 32–bit expansion-slot,
66/33MHz Universal PCI option that provides 2D graphics acceleration for HP Integrity systems
running HP-UX 11i and HP OpenVMS I64 operating systems.
The HP PCI AMD Radeon 7000 Graphics Adapter card is based on AMD’s RV100 graphics chip.
Table 1-1 Option Numbers
Description Option
HP PCI AMD Radeon 7000 Graphics Adapter. AH391A
For minimum operating system and firmware revision information supported for the HP PCI
AMD Radeon 7000 Graphics Adapter, see the I/O Cards and Networking Software website located
at:
http://www.hp.com/go/hpux-iocards-docs .
Click open the Remote Manageability & Graphics/USB Cards link for current information.
Figure 1-1 The HP PCI AMD Radeon 7000 Graphics Adapter
1. HP PCI AMD Radeon 7000 Graphics Adapter
2. DVI-I connector
3. Standard 15–pin VGA connector
The HP PCI AMD Radeon 7000 Graphics Adapter has a standard 15-pin VGA connector and a
DVI-I connector. There is no VGA switch; VGA functions are automatically configured through
the console firmware and software.
DVI-I to VGA Connector adapter
HP OpenVMS I64 does not support direct DVI to DVI operation on the HP PCI AMD Radeon
7000 Graphics Adapter card. The DVI port is only usable with a DVI to analog (VGA) adapter
Module Description 9