HPE Altoline 6921 48SFP+
6QSFP+ x86 ONIE AC
Switch
Quick Start Guide
Step 1: Unpack the switch and check
contents
Step 2: Mount the switch
1
HPE Altoline 6921
48SFP+ 6QSFP+ x86
ONIE AC Switch
2
Rack mounting kit — 2
brackets and 8 screws
3
Country-specific power
cord(s)
4
Console cable — RJ-45
to DB-9
5
Documentation—
Quick Start Guide
(this document) and
Safety and Regulatory Information
NOTE:
The switch has the Open Network
Installer Environment (ONIE) software pre-
loaded, but no switch software image pre-loaded.
CAUTION:
The switch includes plug-in power
supply and fan tray modules that are installed into
its chassis. All installed modules must have a
matching airflow direction. That is, all modules
must have a front-to-back (F2B) airflow direction,
or all modules must have a back-to-front (B2F)
airflow direction. The airflow direction of fan trays
is indicated by text printed on the modules.
1
Attach the brackets to the switch.
2
Use the screws supplied with the rack to secure the
switch in the rack.
CAUTION:
Installing the switch in a rack
requires two people. One person should position
the switch in the rack, while the other secures it
using the rack screws.
4
3
1
5
2
2
1
E042016-AP-R01
© Copyright 2016 Hewlett Packard Enterprise Development LP
The information contained herein is subject to change without notice.
Documentation feedback
Send any errors, suggestions, or comments to Documentation
Feedback (
).
Part Number: 5200-1162
Published: April 2016
Edition: 1
Printed in Taiwan
*5200-1162*
150200001459A R01
