7
5.
Each module is shipped with a module label. Insert the module’s label into the front of the
Remote 2C for the module in the back of the Remote 2C:
Connecting Cables From the Remote 2C To the Office LAN
The Remote 2C has two RJ-45 ports on the front of the box for connecting each module to your LAN.
For auto-detection of LAN speed (10Base-T or 100VG), be sure to connect twisted-pair cable to
these connectors before powering on the Remote 2C.
Follow the illustrations below to connect the
Remote 2C to your LAN:
(continued on next page)
Slide the Module label in until each word is legible:
Category 3, 4, or 5 unshielded twisted-pair cable
Example 1: Remote 2C connected to an Ethernet Switching Hub-12R
LED should light if power is
connected to both the Remote 2C and the hub.
Remote 2C
Hub-12R
100 meters maximum
abner.bk : 1_instal.fm5 Page 7 Monday, June 23, 1997 2:40 PM