manualshive.com logo in svg

HP AD560-96002, Руководство пользователя, Страница: 18 / 136

Поделиться
Скачать
HP AD560-96002 Скачать руководство пользователя страница 18

18

Library overview

The base module has two windows on the front for viewing the robotic motion inside the library. A load 

port door is located to the right front (see 

Figure 5

) where a 5-cartridge magazine can be loaded with 

tape cartridges for insertion into or removal from the library. The load port can also be used for 

additional tape storage. An operator control panel (OCP) is located at the bottom front of the module.

Figure 5

Library load ports on 42U configuration

The base module contains an autoranging power supply (a redundant power supply is optional), card 

cage, cable management feature, and space for mounting up to four LTO-technology tape drives on the 

back.

The card cage in the base module (see 

Figure 6

) provides four cPCI slots for the following:

•

Library robotics controller (see 

Figure 7

)—A single slot, 6U-wide cPCI board having Ethernet ports 

and an RS-232 port. One Ethernet port connects this controller to the Interface Manager card.

•

HP StorageWorks Interface Manager card (see 

Figure 8

)—A single slot, 4U-wide cPCI board having 

six Ethernet ports. This board contains 128 MB of dynamic random access memory (DRAM) plus a 

256 MB CompactFlash card, both in their own sockets. A 2U-wide adapter panel next to the 4U-wide 

Interface Manager card allows it to fit in the lowest 6U-wide card cage slot.

•

HP StorageWorks e2400-FC 2G interface controller (see 

Figure 9

)—A single slot, 6U-wide cPCI 

board, having two 2-Gbps FC ports for connecting to the SAN, along with four 2-Gbps FC ports to 

connect up to four HP Ultrium tape drives.

•

An empty card slot reserved for future use.

The cable management feature is a spool, mounted near the tape drives, that allows LAN and FC cables 

to be dressed and routed away from hot plug or hot swap components. 

Ultrium 460 tape drives (see 

Figure 10

) come installed in one orderable 103e library model option 

bundled with tape media. Ultrium 460 or 960 tape drives are ordered separately with the other 103e 

and 245e EML model options.

10434

Содержание AD560-96002









































































































































Отзывы:

Нет отзывов