background image

Product Overview

Product Overview

4

IPv4 TCP Segmentation Offload (TSO). TSO, also known as “large send” enables a system’s protocol stack 
to offload portions of outbound TCP processing to a network interface card thereby reducing system CPU 
utilization and enhancing performance.

LAN boot support on HP Integrity and HP 9000 (PA-RISC) systems except for rp7410 and rp8400.

Supports readout of Vital Product Data (VPD).

Cable Specifications

Operating Distance for 1000Base-T (Copper UTP): Up to 100 meters — Cat 5 and Cat 5E

Operating distances for 1000Base-SX using multi-mode fiber optic cable are as follows:

Available HP  Fiber Optic Cables:

LED Information

LEDs are provided to indicate Link Activity and Link Speed as follows:

For AD331A, there are two LEDs:

• Activity/Link LED = GREEN light ON when link is established; FLASHING when there is data traffic; 
OFF when link is not established.

• Speed LED:

— Orange if speed is 1000Mbps.

— Green if speed in 100Mbps.

— OFF if speed is 10Mbps.

For AD332A, there is only one LED:

• Activity/Link LED: GREEN light ON when link is established; FLASHING when there is data traffic; 
OFF when link is not established.

• The fiber adapter supports only the 1000 speed; so there is no speed LED.

Connection Difference for the Fiber (1000Base-SX) Cards if Replacing an A6847A Card

Please note that the AD332A uses an LC connector whereas the A6847A card uses an SC connector. If you are 
replacing a single-port A6847A Gigabit Ethernet card with the AD332A, please be sure that the cable has an 
LC connector at the adapter end. 

If

 

the

 

remote

 

connection

 

is

 

type

 

SC,

 

you

 

will

 

need

 

an

 

LC-to-SC

 

cable.

Description

(850nm short wavelength laser)

Modal Bandwidth

Operating Distance

50 micron MMF

400 (MHz * km)

2 to 500 meters (6.6 to 1640 ft)

500 (MHz * km)

2 to 550 meters (6.6 to 1804 ft)

LC-LC

C7524A

Fibre Channel Cable 2m LC duplex 50/125 M/M Optical

AF552A

Fibre Channel Cable 15m LC duplex 50/125 M/M Optical

C7526A

Fibre Channel Cable 50m LC duplex 50/125 M/M Optical

LC-SC

C7529A

Fibre Channel Cable 2m LC-SC duplex 50/125 M/M Optical

AF554A

Fibre Channel Cable 15m LC-SC duplex 50/125 M/M Optical

Содержание AD331A











Отзывы: