Chapter 1
3
1
HP Server Mount Kit for 19 in. 2-Post Rack
Installation Instructions
Introduction
This manual provides instructions for installation of the hp Integrity cx2600 server chassis in a 19 in.
2-column rack, with column widths of 3 to 9 inches.
Cabinet Safety Precautions
WARNING
Ensure that the rack is level and stable before working on the rack. Be sure the
leveling jacks (feet) extend to the floor and that the full weight of the rack rests
firmly on the floor.
WARNING
Ensure that the rack has anti-tip measures in place. Such measures may include
floor-bolting, anti-tip feet, ballast, or a combination of these measures as specified by
the rack manufacturer and applicable codes.
WARNING
Be sure that adequate personnel are on hand to support the product(s) during the
installation process. Use of the appropriate lifting device is recommended as an
installation aid.
WARNING
Always load the rack from the bottom up. Load the heaviest items in the rack first.
This makes the rack bottom-heavy and helps prevent the rack from becoming
unstable.
WARNING
Do not overload the branch circuit that provides power to the rack. The total rack
load should not exceed 80% of the branch circuit rating.
Mounting Kit Contents
This manual provides installation instructions for server mount kit AB292A. This kit is intended for use with
the hp Integrity cx2600 server, and includes the following:
•
Chassis Tray (Base)
•
Two Rack Brackets
•
Cable Management Strain Relief Bar
•
Mounting Hardware (screws, washers, and nuts)
